單項選擇題What is the OSPF default frequency,in seconds,at which a cisco router sends hello packets on a multiaccess network?()

A.10
B.40
C.30
D.20


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Which dose the frame-relay interface-dlci command configure?()

A.remote DLCI on the main interface
B.local DLCI on the main interface
C.local DLCI on the subinterface
D.remote DLCI on the subinterface

2.單項選擇題3DES使用的是()

A.加密—加密—解密
B.加密—解密—加密
C.解密—加密—解密
D.加密—加密—加密

3.單項選擇題Which command can be a router to verify the layer 3 path to a host?()

A.traceroute address
B.tracert address
C.ssh address
D.telnet address

5.多項選擇題選擇加密算法時應該考慮的標準為()

A.算法是受到密碼界社團信任的
B.算法能夠充分抵抗強力攻擊
C.算法支持可變的和長的密鑰長度以及擴展性
D.算法有沒有出口和進口限制

6.單項選擇題What is one benefit of PVST+?()

A.PVST+reduces the CPU cycles for all the switches in the network
B.PVST+automatically selects the root bridge location,to provide optimiz…
C.PVST+allow the root switch location to be optimized per vlan.
D.PVST+supports Layer 3 load balancing without loops.

7.多項選擇題Which two are advantages of static routing when compared to dynamic routing?()

A.Security increases because only the network administrator may change the routing tables.
B.Configuration complexity decreases as network size increases.
C.Routing updates are automatically sent to neighbors.
D.Route summarization iscompued automatically by the router.
E.Routing traffic load is reduced when used in stub network links
F.An efficient algorithm is used to build routing tables,using automatic updates.
G. Routing tables adapt automatically to topology changes.

8.多項選擇題下列算法中哪些是對稱密鑰算法()

A.DES
B.3DES
C.AES
D.SEAL

9.單項選擇題Which item represents the standard IP ACL?()

A.access-list 50 deny 192.168.1.1 0.0.0.255
B.access-list 110 permit ip any any
C.access-list 2500 deny tcp any host 192.168.1.1 eq 22
D.access-list 101 deny tcp any host 192.168.1.1

10.多項選擇題密鑰管理需要考慮()的基本特性

A.生成
B.驗證
C.存儲
D.撤銷和銷毀

最新試題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題

請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()

題型:單項選擇題

傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()

題型:單項選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€邏輯地址范圍?()

題型:單項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題