A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
您可能感興趣的試卷
你可能感興趣的試題
A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the runningconfiguration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface，the switch can learn new addresses，up to the maximum defined.
A.1~99
B.100~199
C.1300~1999
D.2000~2699
A.The switch must be configured with an IP address,subnet mask,and default gateway.
B.The switch must be connected to a router over a VLAN trunk.
C.The switch must be reachable through a port connected to its management VLAN.
D.The switch console port must be connected to the Ethernet LAN.
E.The switch management VLAN must be created and have a membership of at least one switch port.
F.The switch must be fully configured as an SNMP agent.
A.使用策略控制來結合認證、用戶接入和管理員接入對接入安全性進行擴展
B.提供更大的靈活性和機動性、增強的安全性以及用戶生產力增益
C.對所有用戶采用統一的安全策略
D.減少在擴展用戶和管理員對網絡的接入時所需的管理性和運營負擔
When upgrading the IOS image，the network administrator receives the exhibited error message.What could be the cause of this error？（）
A.The new IOS image is too large for the router flash memory.
B.The TFTP server is unreachable from the router.
C.The new IOS image is not correct for this router platform.
D.The IOS image on the TFTP server is corrupt.
E.There is not enough disk space on the TFTP server for the IOS image.
A.RARP
B.RUDP
C.ICMP
D.SNMP
A.protecting a server frome unauthorized acces
B.controlling path selection，based on the route metric
C.reducing router CPU utilization
D.filterring packets that are passing through a router
What is the most likely reason for the dispartly between the actual network numbers at the branches andthe routes in the routing table on Gateway-Router？（）
A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates
A.使用RADIUS代理服務器提供可擴展性
B.只加密密碼
C.將RADIUS認證和授權結合成一個過程
D.支持遠程訪問技術、802.1X和SIP
A.standardization
B.conversion
C.encapsulation
D.synchronization
最新試題
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論？（）
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域？（）
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是，從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題？（）
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍？（）
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么？（）
PC 無法連接到任何遠程網站，無法ping 通其默認網關，也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常？（）
請參見圖示。當計算機A 向計算機D 發送幀時，哪些計算機會接收該幀？（）
路由器使用哪一項信息來確定源主機和目的主機之間的路徑？（）
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述？（）
請參見圖示。在網絡中，PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序？（）