A.spanning-tree mode rapid-pvst
B.spanning-tree uplinkfast
C.spanning-tree backbonefast
D.spanning-tree mode mst
您可能感興趣的試卷
你可能感興趣的試題
A.113.10.4.0
B.186.54.3.0
C.175.33.3.255
D.26.35.2.255
E.17.35.36.0
A.RARP request
B.Show Network Address request
C.Proxy ARP request
D.ARP request
E.Show Hardware Address request
A.FTP
B.TFTP
C.TCP
D.UDP
E.SCP
A.they run a spell check on host names to ensure accurate routing
B.they map individual hosts to their specific IP address
C.they convert domain names into IP address
D.Given an IP address,they determine the name of the host that is…
A.Addresses are allocated after a negotiation between the server and the host to determine the length of the agreement.
B.Addresses are permanently assigned so that the hosts uses the same address at all times.
C.Addresses are assigned for a fixed period of time, at the end of the period, a new request for an address must be made.
D.Addresses are leased to hosts, which periodically contact the DHCP server to renew the lease.
A.network or subnetwork IP address
B.broadcast address on the network
C.IP address leased to the LAN
D.IP address used by the interfaces
E.manually assigned address to the clients
F.designated IP address to the DHCP server
Refer to the exhibit.Explain how the routes in the table are being affected by the status change on interfaceEthernet0.（）
A.The router is poisoning the routes and multicasting the new path costs via interface Ethernet1
B.The router is receiving updates about unreachable networks from router that are connected to interface Ethernet1
C.The router is poisoning the routes and broadcasting the new path costs via interface Ethernet1
D.The router is requesting updates for these networks from routers that are connected to interface Etherne1
A.a router with subinterfaces configured on the physical interface that is connected to the switch
B.a router with an IP address on the physical interface connected to the switch
C.a switch with an access link that is configured between the switches
D.a switch with a trunk link that is configured between the switches
A.can be used over analog circuits
B.maps Layer 2 to Layer 3 address
C.encapsulates several routed protocols
D.supports IP only
E.provides error correction
A.Flash,TFTPserver,ROM
B.Flash,NVRAM,ROM
C.ROM,NVRAM,TFTP server
D.NVRAM,TFTP server,ROM
E.TFTP server,Flash,NVRAM
最新試題
請參見圖示。當計算機A 向計算機D 發送幀時，哪些計算機會接收該幀？（）
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2？（）
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口？（）
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是，從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題？（）
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中需要多少個邏輯地址范圍？（）
請參見圖示。哪種邏輯拓撲是對圖示網絡的準確描述？（）
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接？（）
在Cisco IOS 設備中，啟動配置文件存儲于何處？（）
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么？（）
請參見圖示。在網絡中，PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序？（）