A.one
B.three
C.two
D.zero
您可能感興趣的試卷
你可能感興趣的試題
A.A new switch has no VLANs configured.
B.Connectivity between VLANs requires a Layer 3 device.
C.VLANs typically decrease the number of collision domains.
D.Each VLAN uses a separate address space.
E.A switch maintains a separate bridging table for each VLAN.
F.VLANs cannot span multiple switches.
A.The IOS image will be ignored.
B.The router will prompt to enter initial configuration mode.
C.The router will boot to ROM.
D.Any configuration entries in NVRAM will be ignored.
E.The configuration in flash memory will be booted.
A.show frame-relay end-to-end
B.show frame-relay map
C.show frame-relay lmi
D.show frame-relay pvc
A.Frame Relay
B.HDLC
C.x.25
D.PPP
A.amount of RAM
B.bridge priority
C.IOS version
D.IP address
E.MAC address
F.speed of the links
A.decreasing the number of collision domains
B.filtering frames based on MAC addresses
C.allowing simultaneous frame transmissions
D.increasing the size of broadcast domains
E.increasing the maximum length of UTP cabling between devices
A.Switch1(config-if)# switchport port-security maximum 1
B.Switch1(config)# mac-address-table secure
C.Switch1(config)# access-list 10 permit ip host
D.Switch1(config-if)# switchport port-security violation shutdown
E.Switch1(config-if)# ip access-group 10
Refer to the exhibit.Based on the exhibited routing table,how will packets from a host within the192.168.10.192/26 LAN be forwarded to 192.168.10.1?()
A.The router will forward packets from R3 to R2 to R1
B.The router will forward packets from R3 to R1
C.The router will forward packets from R3 to R1 to R2
D.The router will forward packets from R3 to R2 to R1 AND from R3 to R1
The access control list shown in the graphic has been applied to the Ethernet interface of router R1using the ip access-group 101 in command.Which of the following Telnet sessions will be blocked by this ACL?()
A.from host PC1 to host 5.1.1.10
B.from host PC1 to host 5.1.3.10
C.from host PC2 to host 5.1.2.10
D.from host PC2 to host 5.1.3.8
Refer to the exhibit.Which is the most efficient summarization that R1 can use to advertise its networks toR2?()
A.172.1.4.0/22
B.172.1.0.0/21
C.172.1.0.0/22
D.172.1.4.0/25 172.1.4.128/25 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24
E.172.1.4.0/24 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24
最新試題
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()
OSI 哪一層可提供有序的數據重構服務?()
要將數據包發送到遠程網絡,應使用哪種設備?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()