A.127.0.0.1
B.172.16.0.1
C.192.168.0.5
D.223.0.0.1
E.224.0.0.5
F.254.255.255.255
您可能感興趣的試卷
你可能感興趣的試題
根據下圖,假設路由器已經配置了默認配置,那么這個接口是()。
A.Ethernet
B.Fast Ethernet
C.Gigabit Ethernet
D.asynchronous serial
E.synchronous serial
A.to confine network instability to single areas of the network.
B.to reduce the complexity of router configuration
C.to speed up convergence
D.to lower costs by replacing routers with distribution layer switches
E.to decrease latency by increasing bandwidth
F.to reduce routing overhead
A TCP/IP Transfer is diagrammed in the exhibit.A window size of three has been negotiated for this transfer. Which message will be returned from the receiver to the sender as part of this TCP/IP transfer?()
A.Send ACK 1-3
B.Send ACK 3
C.Send ACK 4
D.Send ACK 4-6
E.Send ACK 6
F.Send ACK 7
Host1正在試圖和Host2聯系。RouterC的e0接口是down的,以下選項正確的是?()
A.RouterC會使用ICMP通知Host1“Host2無法到達”
B.RouterC會使用ICMP通知Host1“Host1無法到達”
C.RouterC會使用ICMP通知Host1,RouterA和RouterB“Host2無法到達”
D.RouterC會發送一個“DestinationUnreachable”的消息類型
E.RouterC會發送一個“RouterSelection”的消息類型
F.RouterC會發送一個“SourceQuench”的消息類型
A.8 subnets, 31 hosts
B.8 subnets, 32 hosts
C.16 subnets, 30 hosts
D.16 subnets, 32 hosts
E.A Class B address can't be subnetted into the fourth octet.
As a network administrator,you have been instructed to prevent all traffic or iginating on the LAN from entering the R2 router.Which the following command would implement the access list on the interface of theR2 router?()
A.access-list 101 in
B.access-list 101 out
C.ipaccess-group 101 in
D.ipaccess-group 101 out
S0/0 on R1 is configured as a multipoint interface to communicate with R2 and R3 in the hub-and-spoke Frame Relay topology shown in the exhibit. Originally, static routes were configured between these routers to successfully route traffic between the attached networks. What will need to be done in order to use RIPv2 in place of the static routes?()
A.Configure the no ip subnet-zero command on R1, R2, and R3.
B.Dynamic routing protocols such as RIPv2 cannot be used across Frame Relay networks.
C.Configure the S0/0 interface on R1 as two subinterfaces and configure point-to-point links to R2 and R3.
D.Change the 172.16.2.0/25 and 172.16.2.128/25 subnetworks so that at least two bits are borrowed from the last octet.
E.Change the network address configuration to eliminate the discontiguous 172.16.2.0/25 and 172.16.2.128/25 subnetwork.
A.
B.
C.
D.
E.
F.
A.lowest port MAC address
B.port priority number and MAC address.
C.VTP revision number
D.highest port priority number.
E.pathcost
A.access-list 101 deny tcp192.168.1.1280.0.0.15192.168.1.50.0.0.0eq23 access-list 101 permit ip any any
B.access-list 101 deny tcp192.168.1.1280.0.0.240192.168.1.50.0.0.0eq23 access-list101permit ip any any
C.access-list 1 deny tcp192.168.1.1280.0.0.255192.168.1.50.0.0.0eq21 access-list1permit ip any any
D.access-list 1 deny tcp192.168.1.1280.0.0.15host192.168.1.5eq23 access-list1permit ip any any
最新試題
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
OSI 哪一層可提供有序的數據重構服務?()
請參見圖示。哪種邏輯拓撲是對圖示網絡的準確描述?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中需要多少個邏輯地址范圍?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()