A.VLAN support
B.compression
C.authentication
D.sliding windows
E.multilink support
F.quality of service
您可能感興趣的試卷
你可能感興趣的試題
網絡管理員在交換機1上創建一個新VLAN并且將主機C和主機D加入到此VLAN中。管理員配置交換機接口FastEthernet0/13到FastEthernet0/24成為新VLAN成員.但是網絡管理員完成配置以后,主機A可以和主機B通信,但是主機A不能和主機C或者主機D通信。哪個命令可以用來解決這個問題?()
A.
B.
C.
D.
A.Only passwords configured after the command has been entered will beencrypted.
B.Only the enable password will be encrypted.
C.Only the enable secret password will beencrypted
D.It will encrypt the secret password and remove the enable secret password from the configuration.
E.It will encrypt all current and future passwords.
A.Security increases because only the network administrator may change the routing tables.
B.Configuration complexity decreases as network size increases.
C.Routing updates are automatically sent to neighbors.
D.Route summarization is compued automatically by the router.
E.Routing traffic load is reduced when used in stub network links.
F.An efficient algorithm is used to build routing tables,using automatic updates.
G.Routing tables adapt automatically to topology changes.
A.ping
B.Telnet
C.FTP
D.TCP
E.IP
A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
A.拒絕服務
B.強制疊加
C.監聽
D.木馬
A.The address is abroadcast address.
B.The Ehernet interface is faulty.
C.VLSM-capable routing protocols must be enable first on the router.
D.This address is a network address.
A.to confine network instability to single areas of the network
B.to reduce the complexity of router configuration
C.to speed up convergence
D.to lower costs by replacing router swith distribution layer switches
E.to decrease latency by increasing bandwidth
F.to reduce routing overhead
根據下圖,WLANdiagram決定了哪兩個事實?()
A.兩個cells的overlap的區域描述了一個basic service set
B.網絡描述了一個extended service set
C.再每個CELL中的AP必須被配置成使用channel 1
D.為了確保連通性,重疊區域必須小于10%
E.兩個訪問點應該被配置成工作在不同的頻道
A.RIPV1 and OSPF are classless routing protocols.
B.Classful routing protocols send the subnet mask in routing updates.
C.Automatic summarization at classful boundaries can cause problems on disc……
D.EIGRP and OSPF are classful routing protocols and summarize routes by def……
最新試題
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
OSI 模型的哪兩項功能在第2層實現?()
要將數據包發送到遠程網絡,應使用哪種設備?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()